Telephone Operation
Follow these steps to store a number in memory.
1 Press PROG/MEM.
PROG/MEM
2Enter the number you want to store. (To store the last number you dialed, simply press REDIAL.)
If you enter a wrong digit, press DELETE to delete the last entered digit. Then enter the correct digit.
3Press PROG/MEM then enter a
Note: If you receive a call while you are storing information in memory, press PHONE to answer the call. After the call, begin again at Step 1.
To replace a stored number, simply store a new one in its place.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To do so, hold down the number immediately preceding the pause until you hear a sec- ond beep. (For example, if 9 is your access code, hold down 9 until you hear a second beep.) This enters a
30
