Star Micronics CBM-820 manual Precautions for Handling, To Prevent Injury and Spreading of Damage

PRECAUTIONS FOR HANDLING

Do not handle the equipment in the following manners, because problems may result.

•Do not use any other power source besides the accessory AC adapter. Also, do not use the AC adapter for other purposes.

•Do not print without paper.

•Do not drop or put any foreign object, such as a clip, pin, or the like, inside the printer.

•Do not spill any liquid or spray any chemical-containing liquid over the equipment.

•Never use a pointed object, such as a pen, to operate the operation panel.

•Do not use Scotch tape to fasten paper together for continuous use. It could damage the printing head.

•Never pull the set paper forcibly. When opening/closing the printer cover, take care that the paper will not be caught. It could cause the paper to jam.

•Be sure to use the specified paper. Use of other paper could deteriorate the print quality or cause a problem with the printing head.

To Prevent Injury and Spreading of Damage

•Never touch the printing head, motor, or paper cutting blade. Your finger may be cut.

•During power-on or immediately after printing, do not touch electrical parts or moving parts, such as the mechanism, motor, internal gear, etc. They may be very hot and can burn your hand/finger.

•Be careful to avoid bodily injure or damaging other objects with an edge of sheet metal.

•Should any error occur while operating the equipment, stop it immediately and disconnect the power plug from the plug socket.

•Only a qualified serviceman is allowed to disassemble or repair the printer.

•Should a problem occur, leave solving it to our serviceman. Do not disassemble the equipment on your own.

•When opening/closing the printer cover, and so on, be careful not to catch your hand or finger on the equipment.

•After using the equipment, turn off the power switch and unplug the AC adapter from a plug socket.