CAN
[Function] | Cancels Print Data in Page Mode | ||
[Code] | ASCII | CAN | |
| Hexadecimal | 18 | |
| Decimal | 24 | |
[Outline] | This command erases all the print data in the current print area in the page mode. | ||
[Caution] | • | This command is valid only in the page mode. | |
| • | Even the print data in the previously set print area is erased, if it is extended over the currently | |
|
| set print area. |
|
[See Also] | ESC W |
| |
ESC SP n
[Function] | Sets Space Size to Right of Characters | |||||
[Code] | ASCII |
| ESC | SP | n | |
| Hexadecimal | 1B | 20 | n | ||
| Decimal |
| 27 | 32 | n | |
[Range] | 0 | n | 32 |
|
|
|
[Outline] | This command sets the right space size of the characters. | |||||
[Caution] | • | In the double width mode, the right space size is doubled. | ||||
•The space size is set in increments of half dot.
•In the page mode, the space size may be shifted a half dot from a set value.
•There are two set values for the standard and page modes, respectively.
[Default] | n = 0 |
– 42 –
