Star Micronics CBM-820 manual Esc, ESC 3 n

ESC 2

[Function]	Sets 1/6-inch Line Feed
[Code]	ASCII	ESC	2
	Hexadecimal	1B	32
	Decimal	27	50
[Outline]	This command sets a line feed amount per line to 1/6 inch.
[Caution]	There are two kinds of line feed amounts for the standard mode and page mode.

•For the standard mode: Set to 1/6 inch.

•For the page mode: Set to 10 dots (10/72 inch)

[See Also]ESC 3

ESC 3 n

[Function]	Sets Line Feed Amount
[Code]	ASCII			ESC	3	n
	Hexadecimal			1B	33	n
	Decimal			27	51	n
[Range]	0	n	255
[Outline]	This command sets a line feed amount per line to n/60 inch.
[Caution]	There are two kinds of set values for the standard mode and page mode. Since the printer has
	the minimum paper feed pitch of 1/144 inch, the line feed amount of n/60 inch is treated as
	follows:

•For the standard mode: Set an approximate value of INT((6n+5)+0.5)/72 inch.

•For the page mode: Set n/72 inch(n coordinate).

[Default]	n = 10 (1/6 inch for the standard mode and 10 dots (10/72 inch for the page mode))
[See Also]	ESC 2

– 51 –