ESC p m t1 t2
[Function] | Generates Specified Pulses |
|
|
| ||||
[Code] | ASCII |
| ESC | p | m | t1 | t2 | |
| Hexadecimal | 1B | 70 | m | t1 | t2 | ||
| Decimal |
| 27 | 112 | m | t1 | t2 | |
[Range] | m = 0, 1, 48, 49 |
|
|
|
|
| ||
| 0 | t1 | 255 |
|
|
|
|
|
| 0 | t2 | 255 |
|
|
|
|
|
[Outline] | This command outputs the signal specified with t1 or t2 to the connector pin m. | |||||||
•The following table lists the types of m.
m | Connector Pin |
|
|
0, 48 | Drawer kick connector No. 2 pin |
|
|
1, 49 | Drawer kick connector No. 5 pin |
|
|
•The ON time shall be t1 ⋅ 2 mS and OFF time t2 ⋅ 2 mS, respectively.
[Caution] | If m goes beyond the range, this command will be ignored, processing the subsequent data as |
| normal data. |
[See Also] | 5.3 Memory Switch Settings, 7. Peripheral Unit Driver Circuit |
– 64 –
