5. Making DIP Switch Settings
The printer’s DIP switches let you specify communications parameters, receive buffer size, and emulation. This “5. Making DIP Switch Settings” explains the settings you can make and tells you how to actually change DIP switch settings.
5.1 Accessing the DIP switches
The DIP switches are located inside the printer, underneath the document table. Use the following procedure to remove the document table so you can operate the DIP switches.
❏ Make sure that the printer is turned off and unplugged from its wall outlet. ❏ Remove the printer cover.
❏ While using a screwdriver or other similar instrument to press down at the location marked (a) in the illustration below, carefully slide the document table in the direction indicated by the arrow until it is out of the way.
a
– 25 –
