Star Micronics CBM-820 manual ESC c 4 n, Sensor

ESC c 4 n

[Function]	Selects No-paper Sensor Valid for Print Stop
[Code]	ASCII	ESC	c	4	n
	Hexadecimal	1B	63	34	n
	Decimal	27	99	52	n

[Range]	0	n	255
[Outline]	•	This command selects in which status of the no-paper Sensor printing should be stopped.
		Each bit has the following different meanings.
		Bit		Sensor	Hexadecimal	Decimal
		0		Undefined	–	–
		1		Undefined	–	–
		2		Undefined	–	–
		3		Undefined	–	–
		4		TOF sensor disabled	00	0
				TOF sensor enabled	10	16
		5		BOF sensor disabled	00	0
				BOF sensor enabled	20	32
		6		Undefined	–	–
		7		Undefined	–	–
[Caution]	•	It is possible to select multiple sensors as a printing stop condition, but if any one of them
		detects the no-paper condition, the printer will stop printing.

•The printer stops printing after printing the on-going line and feeding the paper. If the panel switch is disabled at this time, the printer will release the paper automatically and waits for new paper to be set.

[Default]	n = 0
[See Also]	ESC c 5

– 61 –