Rev. 0.00
3-97
STARLineModeCommandSpecications
ESC * r m l n NUL
[Name] Set raster left margin
[Code] ASCII ESC * r m l n NUL
Hexadecimal 1B 2A 72 6D 6C n 00
Decimal 27 42 114 109 108 n 0
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
<Thermal>
Sets raster left margin.
This command sets the left margin to (n x 8) dots.
When the left margin exceeds the printable area, or if the left margin specification eliminates the print
area ((printable region - right margin) ≥ left margin specified value), this command is ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
<Slip>,<Validation>
Use prohibited.
ESC * r m r n NUL
[Name] Set raster right margin
[Code] ASCII ESC * r m r n NUL
Hexadecimal 1B 2A 72 6D 72 n 00
Decimal 27 42 114 109 114 n 0
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : n = 0
Slip : -
Validation : -
[Function]
<Thermal>
Sets raster right margin.
This command sets the right margin to (n x 8) dots.
When the right margin exceeds the printable area, or if the right margin specification eliminates the
print area ((printable region - left margin) ≥ right margin) specified value, this command is ignored.
n is a decimal description (max. 255 digits) using ASCII characters.
<Slip>,<Validation>
Use prohibited.