Rev. 0.00
5-11
STARLIneModeCommandSpecications
<Printerstatus6ETBCounter(EighthByte)>
Bit Contents Status By model
“0” “1” HSP7000
7 Fixed at “0” - -
6 ETB Counter Bit-4 ○
5 ETB Counter Bit-3 ○
4 Fixed at “0” - -
3 ETB Counter Bit-2 ○
2 ETB Counter Bit-1 ○
1 ETB Counter Bit-0 ○
0 Fixed at “0” - -
(*) ETB Counter
This counter is the 5 bit ETB counter.
(It counts from 0 to 31.When ther counter overflows, it counts up from 31 to 0.))
  Thiscounterisincrementedby1usingthe<ETB>command.
The ETB counter is initialized by the following commands. When doing so, ASB ETB status is cleared.
However, when initializing the ETB counter, ASB is not transmitted.
 <ETBCounterInitializationCommands>
  •<ESC><RS>En :ETBCounterInitialization
  •<CAN> :Cancelprintdataandinitializecommands
<Printerstatus7PositionforPresenterPaper(NinthByte)>
Bit Contents Status By model
“0” “1” HSP7000
7 Fixed at “0” - -
6 Not Used (Fixed at “0”) - ×
5 Not Used (Fixed at “0”) - ×
4 Fixed at “0” - -
3 Presenter Paper Position ×
2 Presenter Paper Position ×
1 Presenter Paper Position ×
0 Fixed at “0” - -
(4)<Note>
Do not use ENQ, EOT, ESC, ACK and SOH when automatic status is valid.Invalidate the automatic status in advance
using the DIPSW (memory switch) or the ESC RS a n command to query these.
(5) Status identification method
Command/Functions Status
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
XON 0 0 0 1 0 0 0 1
XOFF 0 0 0 1 0 0 1 1
ENQ * * * 0 * * * *
EOT * * * 1 * * * 0
ASB (Header -1) 0 * * 0 * * * 1
ASB (Other than Header -1) 0 * * 0 * * * 0
0 = fixed at “0” bits/1 = fixed at “1” bits/* = variable bits.