Rev. 0.00
3-79
STARLineModeCommandSpecications
ESC u n
[Name] Specify two-byte 16 x 16 dot Kanji character (Single density/double density)
[Code] ASCII ESC u n
Hexadecimal 1B 75 n
Decimal 27 117 n
[DenedArea] Thermal : -
Slip : n = 0, 1, n = 48, 49 (“0,” “1”)
Validation : n = 0, 1, n = 48, 49 (“0,” “1”)
[Initial Value] Thermal : -
Slip : Specify two-byte 16 x 16 dot Kanji characters (single density).
Validation : Specify two-byte 16 x 16 dot Kanji characters (single density).
[Function]
<Thermal>
Only setting is valid
Setting is valid after switching to slip or validation.
<Slip>,<Validation>
Specifies two-byte 16 x 16 dot Kanji character (Single density/double density) (* : See “Relationship
of Japanese Character Size Selection.”
n State Transition
0, 48 Specify two-byte 16 x 16 dot [double density] Japanese characters
When two-bytes is selected, they become four-pass characters (state (A) to state (B))
Dots continuous horizontally are printing.
Sets to the 4 x expanded character mode by combining with ESC x 0 (Specify expanded
Japanesecharacters)(state(A)→state(D))
1, 49 Specify two-byte 16 x 16 dot Kanji characters (single density).
When two-bytes is selected, they become two-pass characters (state (B) to state (A))
Dots continuous horizontally are thinned for printing.
Sets to the vertical expanded character mode by combining with ESC x 0 (Specify expanded
Kanjicharacters)(state(B)→state(C))
When page mode is selected, only setting is valid
Setting is valid after switching to line mode.