Rev. 0.00
3-124
STARLIneModeCommandSpecications
Command Transmission Example
1) Set the Auto Logo function in advance and register to the non-volatile memory.
ESC GS / 1 n ( n = 0x01 ): Auto Logo Function ON
ESC GS / 2 n ( n = “/” ): Auto Logo Command Character (“/”) Specification
ESC GS / 3 nL nH d1 d2 … dk: User macro 1 definition
nL = 4 nH = 0: Register macro data count = 4 bytes
d1 = 0x1b d2 = 0x1d d2 = 0x61 d3 = 0x01: Registration macro
  <ESCGSa1:Centeralignment>
ESC GS / 4 nL nH d1 d2 … dk: User macro 2 definition
nL = 12 nH = 0: Register macro data count = 12 bytes
  d1=0x1bd2=0x64d3=0x03: Registeredmacro<ESCd3:CutpositionpartialCut>
d4 = 0x1b d5 = 0x1c d6 = 0x70 d7 = 0x01 d8 = 0x00: <ESCFSp10:Logo1print>
  d9=0x1bd10=0x1dd11=0x61d12=0x00: <ESCGSa0:Leftalignment>
ESC GS / 5 n ( n = 0x01 ): Auto Logo command character, space conversion
ESC GS / 6 n ( n = 0x01 ): Partial cut valid just prior to Auto Logo printing
ESC GS / W: Register Auto Logo definition data to
non-volatile memory.
2) Embed registered command character in print data and transmit.
 “CHEESEBURGER/2”→“/”isrecognizedasthecommandcharacter.
The command character is converted to a space and “2” specifies logo 2.