Rev. 0.00
3-6
STARLIneModeCommandSpecications
ESC R n
[Name] Specify international character set
[Code] ASCII ESC R n
Hexadecimal 1B 52 n
Decimal 27 82 n
[DenedArea] Thermal : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 69 (”A” ≤ n ≤ “E”)
Slip : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 69 (”A” ≤ n ≤ “E”)
Validation : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 69 (”A” ≤ n ≤ “E”)
[Initial Value] Thermal : Memory switch setting
When installed with Japanese language characters and DBCS setting: Fixed at n = 8
Slip : Memory switch setting
When installed with Japanese language characters and DBCS setting: Fixed at n = 8
Validation : Memory switch setting
When installed with Japanese language characters and DBCS setting: Fixed at n = 8
[Function] Specifies international characters
See each printer’s product specifications manual for details on the memory switch settings.
n International Characters
0, 48 USA
1, 49 France
2, 50 Germany
3, 51 UK
4, 52 Denmark
5, 53 Sweden
6, 54 Italy
7, 55 Spain
8, 56 Japan
9, 57 Norway
10, 65 Denmark II
11, 66 Spain II
12, 67 Latin America
13, 68 Korea
14, 69 Ireland
64 Legal
When installed with Japanese language characters and DBCS setting, this command is ignored.
Note that if the code page 3041 (Maltese) is selected for the code page, international characters are
disabled and the specified characters of code page 3041 are printed.
At that time, the specified international character setting is valid when changed to a different code
page.
(Note) The settings using this command are valid for all stations and modes.