Rev. 0.00
3-22
STARLIneModeCommandSpecications
Precautionsforselecting<Option1>
1. Prints white/black inverted characters using 5 x 9 fonts regardless of the current font size setting.
2. Inserts a one dot string of black printing to the head of the white/black inverted characters.
3. Printing data created on a conventional red/black printer, using 1 and 2 above, there are cases in which the print-
ing position will shift to the right and a line of printable characters reduced.
4. Download registered characters defined with 5 x 9 fonts are printed regardless of the current font setting (7 x 9/5
x 9).
5. Must not set “ANK default dot count = Narrow” with the memory switch. (This will cause a white line to appear
between characters.)
Precautionsforselecting<Option2>and<Option3>
1. Do not apply an upper line or an underline when rotating 90 or 270 degrees.
• When m = 83 Red/black adornment of ANK space characters (20H).
m n Red adornment of ANK space characters (20H).
83 0 Adorn
83 1 Do not adorn
This parameter specifies whether to adorn red/black for ANK space characters in red printing mode (black/white in-
verted).
The ANK space characters are limited to ASCII code 20H in this setting.
In the character code table, if 7FHex is a space character, 7FHex is a target for this setting.
The following is an example of each setting.
It is possible to avoid unnecessary adornment in printing patterns that provide spacing of printing positions with ANK
space characters (20H) when red is specified.
(Print Example)
PrintData:<ESC>“4”“TOTAL”20H20H20H20H20H20H20H20H20H“$1234”<LF>
<Condition1>ANKadornment=“black/whiteinvertedprinting,”ANKspacecharacters=“red/blackadornment”
TOTAL $1234
<Condition2>ANKadornment=“black/whiteinvertedprinting,”ANKspacecharacters=“nored/blackadornment”
TOTAL $1234