Rev. 0.00
3-113
STARLineModeCommandSpecications
ESC RS d n
[Name] Set print density
[Code] ASCII ESC RS d n
Hexadecimal 1B 1E 64 n
Decimal 27 30 100 n
[DenedArea] Thermal : 0 ≤ n ≤ 15
48 ≤ n ≤ 57 (“0” ≤ n ≤ “9”), 65 ≤ n ≤ 70 (“A” ≤ n ≤ “F”)
Slip : -
Validation : -
[Initial Value] Thermal : Memory switch setting
Slip : -
Validation : -
[Function]
<Thermal>
Sets print density.
This command stops printing to be executed.
When in 2-color print mode, this can set the print density of red print.
n Print Density
Single Color Printing Mode 2-color Printing Mode Red Print Density
0, 48 Print density 1.3 Print density 1.2
1, 49 Print density 1.2 Print density 1.2
2, 50 Print density 1.1 Print density 1.0
3, 51 Print density 1.0 Print density 1.0
4, 52 Print density 0.9 Print density 1.0
5, 53 Print density 0.8 Print density 0.8
6, 54 Print density 0.7 Print density 0.8
7, 55 (Reserved) (Reserved)
8, 56 (Reserved) (Reserved)
9, 57 (Reserved) (Reserved)
10, 65 (Reserved) (Reserved)
11, 66 (Reserved) (Reserved)
12, 67 (Reserved) (Reserved)
13, 68 (Reserved) (Reserved)
14, 69 (Reserved) (Reserved)
15, 70 (Reserved) (Reserved)
<Slip>,<Validation>
Only setting is valid
Setting is valid after switching to thermal.