Rev. 0.00
3-30
STARLIneModeCommandSpecications
ESC A n
[Name] Denes(thermal)a3mm/4mmlinefeedamount/Denes(slip)n/72inchpitchlinefeed
[Code] ASCII ESC A n
Hexadecimal 1B 41 n
Decimal 27 65 n
[DenedArea] Thermal : 0 ≤ n ≤ 255
Slip : 0 ≤ n ≤ 85
Validation : 0 ≤ n ≤ 85
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Defines the line feed amount.
The line feed amount defined using this command is specified to the current line feed amount by the
ESC 2 command.
<Thermal>
n Amount of Line Feed
0 ≤ n ≤ 9 Denesa3mmlinefeedamount
10 ≤ n Denesa4mmlinefeedamount
<Slip>,<Validation>
Defines line feed amount for one line as n/72 inch.
Line feed amounts can be set independently for both line mode and page mode.
ESC 2
[Name] Specify line feed amount (ESC A n)
[Code] ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Memory switch setting
Slip : 1/6 inch line feed
Validation : 1/6 inch line feed
[Function] Specifies the line feed amount to the value defined by ESC A n.