Selectgraphics mode
MODE ASCII Decimal Hexadecimal
Std. <ESC> “. ., nO 27 42 110 1B2’4 110
~q~ I-12 ,ml nl n2 ml II1n2m1
,m2’ m2 .7]2 .
.Selects one of eleven graphics modes depending on the
value of nOand prints bit-image graphics in this mode.
See the <ESC> “K” command (for 8-bit graphics) or the
<FS> “Z” command (for 24-bit graphics) for information
on nl, n2, ml, m2, etc.
InO IGraphics mode
I0I8blt N~rmalden~itY (60 dots per inch)
18-bit Double-density (120 dots per Inch)
28-bit Double-density, double-speed (120 dots per inch)
I3I8btQu~dr”Pedensi~Y (240 dots per inch)
I4\8-bltcRT~r~~hi@ ~ode, (80 dots per inch)
I6I8-bitCRT graphics, mode II (9O dots per inch)
I32 I24-bit Normal-density (6Odots per inch)
I33 124-bit”Double-density (120 dots per inch)
I38 I24-bit CRTgraphcs (9Odots per inch)
39 24-bit Triple-density (180 dots per inch)
40 24-bit Hex-density (360 dots per inch)