change the position again using this procedure, or
until the power to the printer is turned off.
●Ifyou want to save this value for future use (after the
printer has been turned off and on again), you must
save it as amacro. See “Saving Macros” on page 42.
Note: This function will only work if you use it immediately afier you
have loaded paper as described above. If paper has already
been fed into the printer, this function will not work.
Eject and park
If paper has already been loaded, and the printer is not-
ready, the (SET/EJECT] button has two different functions,
depending on the setting of the release lever.
“If the release lever is set to the back position for cut
sheet paper (>), pressing the [SET/EJECT] button will
eject the sheet.
.If the release lever is set to the forward position for
fanfold paper (,1$), pressing the [SET/EJECT] button will
park the fanfold paper to allow you to print on cut
sheets. See “Parking paper” on page 31.
Note: Ifyou are feeding fanfold paper through the bottom slot of the
printer, this button will have no effect.
Quiet printing
Even though the NX-2480 Rainbow/Colour is aquiet
printer, it also has a“quiet” mode, which allows it to
print at a reduced noise level. Setting the quiet mode
requires that the printer is in ready mode. This is an
exception to the general rule that settings are made
when the printer is in not-ready mode.
Page37