●
●
●
Press the [SET/EJECT] button. This should make the
printer feed the paper round the platen until it is in a
position suitable for printing. The ON LINE indicator
should come on. If this does not happen, you have
probably not loaded the paper correctly. Take the
sheet out and try loading it again.
If the paper is at the wrong place to start printing (for
instance, if the address printed on the top of your let-
terhead takes up alot of space), put the printer not-
ready mode (press the [~] button) and use the
micro-feed function, as described in Chapter 4.
You can now start printing.
Loading and parking fanfold paper
You can use fanfold paper up to 25cm (10”) wide with
this printer. You can feed this paper from the bottom or
the rear of the printer.
These are the ways inwhich fanfold paper is fed through
the printer:
IPage27