restart from the point where it left off when you make
the printer ready again.
Feeding paper through the printer
There are a number of ways in which you can feed paper
through the printer.
One line or several lines at atime
Make the printer not-ready by pressing the (~]
button, and press the [PAPER FEED] button. This will feed
the paper forward one line. If you continue to hold down
the [PAPER FEED] button, the printer will continue to feed
A
the paper one line at a time.
Make the printer ready again to continue printing.
page at atime
‘T~is will either eject acut sheet or feed fanfold paper to
the top of the next sheet. To determine where the top of
asheet should be, see “Setting the top of aform” on
page 35.
●If you want to feed apage of paper through the
printer. make the printer not-ready. Press and hold
down the [PAPER FEED] button.
While holding down the [PAPER FEED] button, press the
mbutton.
Release both buttons at the same time. The paper will
feed through.
Individual form tear-off
You can tear off individual sheets (for instance, sales
invoices) from fanfold paper.
●While the printer is in ready mode, press and hold
down the [~] button.
●Press the [PAPER FEED] button. The paper will move
-forward about 2inches (50mm), so that you can tear
off the sheet.
Page34