printer, the gap is narrowed (thin paper), and if you pull
it towards the front. the ~a~ is widened [thick DaDer).
As you move the lever, you can feel it click between the
six different positions. Position number 2(starting from
the rearmost position) is the one you will generally use
for single sheets of paper (fanfold or cut sheet). Here is a
table for the adjustment lever when you use multi-part
sets.
Paper Weight of each Thickness Recommended
type sheet ,(total in mm) ;;:e;e::::;;
Single 14 to 24 Ibs (52 to 90 gsm) 0.07 to012 2or 3
2-part 11 to 14 Ibs (40 to 52 gsm) 012 to 014 2or 3
3-part 11 to 14 Ibs (40 to 52 gsm) 0.18 to 0.21 3or 4
4-part 11 to 14 Ibs (40 to 52 gsm) 0.24 to 0.28 4or 5
5-part 11 to 14 Ibs (40 to 52 gsm) 0.30 to 0.35 5or 6
Note: if you use multi-part sets, setup the Multi-Part setting using
the Electronic DIP switches as described in “B5 and B6 -Multi-
part mode” on page 58.
Page25