Place the cartridge on the cartridge carrier inside
the printer. Make sure that the ribbon is between
the print head and the print head shield. Press the
cartridge so that it “clicks” into place. If the cart-
ridge does not “click” into position on both sides,
you may need to turn the cartridge knob about 1/4
of aturn clockwise.
●Once the cartridge is in the carrier, tighten the rib-
bon again by turning the cartridge knob clockwise
(about 1/2aturn). Check once more to make sure
that the ribbon is between the print head and print
head shield (if it isn’t, take the cartridge out, and try
again).
Page11