Character sets
The following tables show the Standard and IBM char-
acter sets. Also shown are the IBM code pages (interna-
tional variations of IBM character set #2) and the
standard (Epson) mode international character sets
(international variations of the Epson Standard charac-
ter set).
The decimal character code for each character is shown
in an inset at the bottom right of the character.
The hexadecimal character code for acharacter can be
found by reading the hexadecimal column and row
numbers, which are at the top and on the left of the
table. For example, the character “A” is in column 4 and
row 1,so its hexadecimal character code is 41. This is
equivalent to decimal 65 (4 x16+1=65), which is the
decimal number shown in the inset.
Control codes are indicated by abbreviations in angle
brackets, e.g. <LF>.
Page 141