baseunit for line spacing
MODE ASCII Decimal Hexadecimal
IBM <ESC> “[“ “ \“27 91 92 IB 55 5C
<4> <c> <o> 400 04 00 00
<O> nl n2 Onl n2 00 nl n2
Sets the base unit for the line spacing commands,
<ESC> “3” and <ESC> “J”, as shown below:
nl n2 Line spacing unit
o180 1/180 inch
o2:6 1/216 inch
1104 1/360 i:lc i
T-hiscommand becomes effective only after <ESC> “3”or
<ESC> “J” is received. The default base unit is set to
1/216”.
Set linespacing
MODE ASCII Decimal Hexadecimal
Both <~ Sc> “3,, ;, 27 5: nIB 33 n
Sets the distance the paper advances or reverses in sub-
sequent line feeds to n/180 inch (STD and IBM mode),
n/216 inch or n/360 inch (IBM mode only) according to
the preceding base unit.
The value of nis between Oand 255. If n=O,in Stan-
dard mode the line-feed distance is set to O,but in IBM
mode the command is ignored.
Page 111