Step 9.
Connect the main I/O cable (e) to J1 connector on the display board.
Step 11.
Attach ground strap of the display assembly to the frame with a screw and washer.
16
Screw Locations
Step 10.
Mount the display assembly to the frame and note the screw locations (see figure above). Secure top assembly with (4) M4 screws and
(4) flat 5/16 washers.
Step 12.
Secure the lower left and lower right of the dis- play assembly with (1) M4 screw and (1) flat 5/16 washer on each side.
