Step 20.
Install the lower display back cover onto display using (6) M4 screws. Next install upper display back cover onto display with (8) of the same screws, tighten all screws.
Caution: Do not use power tools or over torque the screws.
Step 22.
Turn power on. Perform a visual inspection, and test the features and functions of the unit prior to use.
Note: Refer to the User’s Manual for calibration in- structions and other settings.
Step 21.
If not done already, position the treadmill where you plan to use it. If necessary, level the tread- mill using the two adjustable feet under the tail roller. Loosen the lock nuts, rotate the feet until the treadmill is stabilized, and retighten the lock nuts.
YOU HAVE NOW COMPLETED THE EMBEDDED DISPLAY INSTALLATION
24 |
