Step 13.
Install left handrail to the frame as shown using
(3)5/16-18 x 1.0” socket head screws and (3) 5/16 washers. Partially lift up the side bed cov- ers, if necessary. Note the orientation of the mounting plate. DO NOT tighten screws fully yet. Repeat install for right handrail.
Step 15.
Now tighten the 2 front neck screws (5/16-18 x 3.0” socket head) to a torque value of 200 in- lbs (22.5 Nm).
10
Step 14.
Make sure the gap between the rails is closed and, using the 5/32” Hex key, fasten the (2) #10 button head socket screws. Tighten the screws to a a torque value of 45 in-lbs (5.0 Nm). Repeat for the other side.
Step 16.
Tighten the 2 upper neck screws (5/16-18 x 3.0” socket head) to a torque value of 200 in-lbs (22.5 Nm).
620-7920 Rev A
