Step 25.
Install left and right handrail grommets. Slide the grommet down the rail and snap it in place over the bed rails covers. Push down and ro- tate the grommet slightly to seat the tabs into the plastic covers.
Note: Make sure the grommet is tightly secured in place.
Step 27.
Secure the power cable to the frame with the tie
Caution: Make sure not to damage the power cord.
13
Step 26.
Insert the power cord through the tie wrap loop below motor compartment and connect it to the power receptacle.
Note: Don’t turn on the power switch yet.
Step 28.
Position the treadmill in its place. If leveling the treadmill is necessary, loosen the lock nuts of the leveling feet, rotate the feet until the tread- mill is stabilized, then
