5
2
1
3
Step 21.
Plug identified PVS connectors into the high- lighted locations on the center console board.
Note: The DC power connectors on the center con- sole board are interchangeable.
Step 23.
Install the lower display back cover onto display using (6) M4 screws. Next install upper display back cover with (8) M4 screws, tighten all screws.
Caution: Do not use power tools or over torque the screws.
Step 22.
Secure the PVS center console in place using the screws you saved earlier.
Step 24.
Turn power on. Perform a visual inspection, and test the features and functions of the unit prior to use.
Note: Refer to the User’s Manual for calibration in- structions and other settings.
YOU HAVE NOW COMPLETED THE PERSONAL VIEWING SCREEN INSTALLATION
44 |
|
