Star Trac 620-7920 manual Contact heart rate Hot Bar Stop

Contact heart rate

Hot Bar

E-Stop

Step 12.

Connect the Hot Bar cable (i) to JP7 connector on the center console board.

Step 14.

plug and secure the coax cable (h) into the coax adapter on the tuner card of the embed- ded display assembly.

Step 13.

Connect the E-Stop cable (g) and the Contact Heart Rate cable (c) to respective connectors on the FitCpu board located on the back of embed- ded display.

DC Power

Step 15.

Now plug the DC power cable (a) from the base neck into DC connectors on the embedded dis- play assembly.

22 620-7920 Rev A