toggle the state of the pump from the
Setting Pump Lead/Lag Times and Activating Pump Lead/Lag Operation
While in the Configuration Menu, the pump lead/lag (rotation) can be enabled or disabled. Simply press the Process or Recirculation Pump Interval button on the screen to toggle between Enabled and Disabled.
The interval between rotating pumps may also be setup in this screen. Press the CW Pump Rotation Interval button to bring up the time entry screen. Acceptable range is
Viewing Pump Run Times
From the Main Menu, use the Up or Down buttons to highlight either the “Chilled Water Process Pump Hourmeters” or “Chilled Water Recirc Pump Hourmeters” menu. Then
press ↵ to display the hourmeters.
Note: This is a complete list of all pumps that may be included in the system. Any pump that is not included in the system will not accumulate time.
The Pump Run Time screen displays:
Figure 14
Pump Run Time Display Screen
Page 58 of 77 | SCW Series Central Chilling Stations |
