be shown on this screen. Compressors will display one of the following states:
1.OFFLINE – This indicates that the compressor has been turned off in the compressor enable/disable screen. The compressor will not be called to operate until it has been
2.READY – Indicates that the compressor is enabled and ready to run. However, the current loading does not require the compressor to be running. This compressor will be automatically started when needed. The color code for this indication is yellow.
3.RUNNING – Compressor is currently running. The color code for this indication is green.
4.FAULT – A safety on the compressor indicates a fault condition and the compressor has been deactivated. Once the problem is remedied, the compressor will return to a READY state unless it is put in the OFFLINE state. The color code for this indication is red.
Operating the chiller compressors
To enable or disable the individual compressors, start at the Main
Menu, then:
Press the Up or Down buttons on the right side of the screen to highlight “Chiller Configuration”
Press the ↵ button
The configuration menu screen displays:
Figure 10
Chiller Configuration Screen
Page 52 of 77 | SCW Series Central Chilling Stations |
