Manuals / Brands / Personal Care / Microscope & Magnifier / Sterling / Personal Care / Microscope & Magnifier

Sterling SDD 1 SGM 4.4. Changing the dos ing disc in the SDD dos ing sta tion, Main te nance 4-8

1 85

Download 85 pages, 1.27 Mb

4.4. Changing the dos ing disc in the SDD dos ing sta tion

Re moving the dos ing disc

Empty the dos ing sta tion.

»Switch the con trol unit off by means of the on/off switch.

Dis con nect from mains volt age.

Open the tight en ing strap on the dos ing hop per.

Re move the dos ing hop per from the dos ing unit.

Dis man tle the dos ing unit and re move the scraper.

Loosen the two hexa gon socket screws (M6 x 30) on the top side of the dos ing disc.

Loosen the cen ter hexa gon socket screw (M6 x 12) and re place by an M6 x 60 screw.

Lift the dos ing disc from the dos ing unit hous ing by this screw.

Installating the dos ing disc

Change and place the dos ing disc in the dos ing unit hous ing.

Re move the screw (M6 x 60).

Screw the dos ing disc in place by means of 2 hexa gon socket screws (M6 x 30).

Mount the cen ter hexa gon socket screw (M6 x 12).

In stall the scraper and then the dos ing unit.

Turn the dos ing disc to check for smooth move ment.

Po si tion the dos ing hop per on the dos ing unit.

Tighten the tight en ing strap.

176-1MS

SDD 1 SGM

Main te nance 4-8

Contents

Main Page Page Ta ble of con tents Page 1. Safety in struc tions 1.1. For your safety Safety in struc tions 1-2 Safety in struc tions 1-3 1.2. For the op er at ing safety of the equip ment Safety in struc tions 1-4 Page F Page 3. Put ting into op er a tion & 3.1. Con trol Sys tem S 150 Put ting into op er a tion 3-2 3.1.1. Key As signment S 150 Put ting into op er a tion 3-3 % 3.2. In iti al ope ra ti on pro ce du re & Put ting into op er a tion 3-5 & F Put ting into op er a tion 3-6 & Page 3.3. Ba sic Pa ra me ter Set ting Put ting into op er a tion 3-9 Put ting into op er a tion 3-10 Put ting into op er a tion 3-11 F $ F Put ting into op er a tion 3-13 F Put ting into op er a tion 3-15 3.4.3. Pre pa ring the Feed Sta ti on for Nor mal Ope ra ti on F Put ting into op er a tion 3-16 Page Put ting into op er a tion 3-18 Put ting into op er a tion 3-19 & F 3.8. Vie wing the Ac tu al Va lu es F Put ting into op er a tion 3-22 3.9. Stop ping the Con ti nu ous Ope ra ti on bzw. Page & F & Put ting into op er a tion 3-25 F Put ting into op er a tion 3-26 4. Main te nance Main te nance 4-1 L F Main te nance 4-2 4.1. Main te nance in ter vals F Main te nance 4-3 & 4.2. Re moving/re plac ing scraper in the SDD dos ing sta tion L Main te nance 4-4 F & Main te nance 4-5 4.3. Cleaning the DD dos ing sta tion Main te nance 4-6 A B Page 4.4. Changing the dos ing disc in the SDD dos ing sta tion Main te nance 4-8 Main te nance 4-9 4.4.1. In stalling Dif fer ent Types of Dosing Discs F Main te nance 4-10 4.5. Re moving/re plac ing the scraper in the SDT dos ing sta tion Main te nance 4-11 F Main te nance 4-12 4.6. Cleaning the SDT dos ing sta tion Main te nance 4-13 F Main te nance 4-14 4.7. Ex change able sta tions F Main te nance 4-15 Page Page & Main te nance 4-18 5. As sem bly in struc tions As sem bly in struc tions 5-1 L Page 5.2.1. Mount ing on the pro cess ing ma chine F L F As sem bly in struc tions 5-3 5.3. Con trol sys tem S 150 F As sem bly in struc tions 5-4 F 6. Functio nal des crip ti on 6.1. SDD 1 SGM 6.2. Con trol Unit S 150 Functio nal des crip ti on 6-2 7. Tech ni cal Data Page Page Page Spa re parts list 8-2 9. Ac ces so ries Page Values re quired for the ba sic pa ram e ter: Page F & 10. Elec tri cal ma nu al Elec tri cal ma nu al 10-1 Page Elec tri cal ma nu al 10-3 F Elec tri cal ma nu al 10-4 & Elec tri cal ma nu al 10-5 Elec tri cal ma nu al 10-6 F Elec tri cal ma nu al 10-10 & Elec tri cal ma nu al 10-11