Sub-Zero 430/O, 424/O, 430/F installation instructions 427 427R

Models: 430 430/F 424/O 430/O

1 36
Download 36 pages 28.23 Kb
Page 23
Image 23
Manual background

MODELS 427 A N D 427R I N S TA L L AT I O N

F I N I S H E D W O O D SIDE PANELS

LOCK I N S TA L L AT I O N

M O D E L S

427 427R

Side panels for Models 427 and 427R are not attached to the unit. You must securely fasten the panels to adjacent cabinets and floor.

Panels should be fastened to the floor and walls using ‘L’ brackets (hardware not provided). To help you move the unit into place, rout out an area in the floor so the ‘L’ bracket will sit flush with the floor level. Brackets and screws are provided for mounting the unit to adjoining cabinets and side panels. Each unit has four side-mounting clips on each side.

IMPORTANT NOTE: For installations where you are not attaching to a side wall, or you are installing two Model 427, 427R or Integrated units together, you must remove the side- mounting clips before moving the unit into position. After removing the clips, replace the screws into the appliance.

A dual installation heater kit (#7007529) is necessary for anchoring two Model 427, 427R or Integrated units together. Contact your Sub-Zero dealer or call 800-222-7820 for details.

For Models 427 and 427R, the accessory lock is attached to the decorative door panel through

afield-drilled hole in the panel. The catch should be installed on the top of appliance cabinet before the unit was moved into position. Installation instructions are included with the lock kit.

IMPORTANT NOTE: For accessory stainless steel panels requiring a lock, panels must be ordered with the lock mounting hole pre- drilled.

9 0 - D E G R E E DOOR STOP

Models 427 and 427R have a 90-degree door stop built into the hinge system. Use the blade edge of a standard screwdriver and rotate the brass cam in the center portion of the hinge until you reach the stop. You must make this adjustment to both the bottom and top hinge. Refer to illustration 15 below.

COMPLETING T H E I N S TA L L AT I O N

IMPORTANT NOTE: When you have completed the installation of the Model 427 or 427R Wine Storage unit, refer to pages 34–35 for the Installation Checklist and Service Information.

O P T I O N A L

C O M P O N E N T S

Optional installa- tion components are available through your Sub-Zero dealer, or call Sub-Zero at 800-222-7820.

You can also visit our website at subzero.com.

Illus. 15

Dimensions in parentheses are in

 

 

 

 

millimeters unless otherwise specified.

23

Page 23
Image 23
Sub-Zero 430/O, 424/O, 430/F installation instructions 427 427R