Sub-Zero 424/O, 430/O, 430/F M O D E L 4 2 4 F S, 424 424FS, M O D E L S

MODELS 424 A N D 424FS I N S TA L L AT I O N

ANTI - TIP BRACKET I N S TA L L AT I O N M O D E L S

424 424FS

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with the anti-tip bracket.

An anti-tip bracket and hardware is provided with the Wine Storage unit. The anti-tip bracket must be installed on a solid base to prevent tipover in case several loaded wine shelves are extended at the same time.

M O D E L 4 2 4

The anti-tip bracket should be attached to the wall behind the unit with the bracket flange located immediately above the top of the unit. Refer to illustration 1 below.

A smaller metal ‘countertop’ bracket is also provided with the Model 424, for installations that need to be modified to provide a secure surface for attaching the bracket. This bracket will secure the front of the unit to the under- side of the countertop, above the unit. Refer to illustration 2.

M O D E L 4 2 4 F S

If you are installing the Model 424FS in a space deeper than 24 5/8" (625), the anti-tip bracket must be installed no more than 24 5/8"

(625)deep, so it engages the unit properly. It is important that this measurement be made from the front surface of the door, to the back of the anti-tip bracket. Refer to illustration 3 below.

Anti-Tip

Bracket

1/4" (6)

Illus. 1

Countertop

Bracket

Illus. 2

Anti-Tip Bracket

Illus. 3

5