Chapter 6 Section 6.5
Implementing the JDBC/ODBC eWay Sample Projects Building and Deploying the prjJDBC_JCD Sample Project
JDBC/ODBC eWay Adapter User’s Guide 90 Sun Microsystems, Inc.
You must configure eWay properties in both the Connectivity Map and the
Environment Explorer.
Figure 38 eWays in the cmDelete Connectivity Map
Configuring the eWay Properties
Steps required to configure the eWay properties:
1Double-click the FileClientIN eWay on each of the Connectivity Maps and modify
the properties for your system, as seen in Table 15. Click OK to close the Properties
Editor.
2Double-click the FileClientOUT eWay on each of the Connectivity Maps and
modify the properties for your system, as seen in Table 16. Click OK to close the
Properties Editor.
Table 15 FileClientIN eWay Property Settings
Connectivity Map Property Name Required Value
cmDelete Input file name TriggerDelete.in
cmInsert Input file name TriggerInsert.in
cmPsSelect Input file name TriggerPsSelect.in
cmTableSelect Input file name TriggerTableSelect.in
cmUpdate Input file name TriggerUpdate.in
Table 16 FileClientOUT eWay Property Settings
Connectivity Map Property Name Required Value
cmDelete Output file name JCD_Delete_output%d.dat
cmInsert Output file name JCD_Insert_output%d.dat
cmPsSelect Output file name JCD_PsSelect_output%d.dat
cmTableSelect Output file name JCD_TableSelect_output%d.dat
FileClientIN eWay
eaJDBCOUT eWay
FileClientOUT eWay