![](/images/new-backgrounds/1166199/166199107x1.webp)
A+ SERVER
USB Wake-Up
JPUSB1 jumper allows you to "wake up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system. These jumpers are used in conjunction with the USB
Backpanel USB
Wake-Up Enable (JPUSB1)
Jumper Settings
Jumper Setting |
| Definition |
Pins |
| Enabled (default) |
| ||
Pins |
| Disabled |
| ||
|
|
|
BMC Jumper
JPB1 is used to enable or disable theBMC (Baseboard Management Control) Chip and the onboard IPMI connection.This jumper is used together with the IPMI settings in the BIOS. The default position is on pins 1 and 2 to Enable BMC. See the table on the right for jumper settings.
BMC Jumper Enable (JPB1)
Jumper Settings
Jumper Setting |
| Definition |
Pins |
| Enabled (default) |
| ||
Pins |
| Disabled |
| ||
|
|
|