![](/images/new-backgrounds/1166199/166199109x1.webp)
Chapter 5: Advanced Serverboard Setup
5-11 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on the
Power LED
DP3 is an Onboard Power LED. When this LED is lit, it means power is present on the serverboard. Be sure to turn off the system and unplug the power cord(s) before removing or installing components.
IPMI LED
The serverboard contains an IPMI LED (DP1) located near the corner above the
Note: This LED is not installed on
UID LED (LE1)
A rear UID LED Indicator, located at LE1, works in conjunction with the rear UID switch to provide easy identification for a unit that might be in need of service. Refer to Page
LAN LED
(Connection Speed Indicator)
LED Color |
| Definition |
Off |
| 10 MHz |
| ||
Green |
| 100 MHz |
| ||
Amber |
| 1 GHz |
| ||
|
|
|
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color | Status | Definition |
Link | Green: | 100 Mb/s |
(Left) | Solid |
|
Activity | Amber: | Active |
(Right) | Blinking |
|
Power LED (DP3)
State |
| System Status |
On |
| Standby power present |
| ||
|
| on motherboard |
Off |
| No power connected |
| ||
|
|
|
| IPMI LED (DP1) | |
|
|
|
State |
| System Status |
On |
| Active connection |
| ||
Off |
| No connection |
| ||
|
|
|