Chapter 7: BIOS
is detected, at which point you will need to press the F1 button to
Hit 'DEL' Message Display
Use this option to Enable or Disable the "Press DEL to run setup" message in POST.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and Disabled.
Restore on AC Power Loss
This sets the action that occurs when an AC power loss occurs. Options include Power Off, Power On and Last State.
Watch Dog Timer
This sets the Watch Dog Timer. Options include Enabled or Disabled.
Processor & Clock Options
CPU Configuration
This displays static information on the Module Version, AGESA Version, Physical Count and Logical Count for the system's processor(s) and clock.
CPU Information
This setting is used to select which physical CPU's information to display. Options include Processor 0 or Processor 1. The information for the selected processor includes Processor number, Revision, Cache L1/L2/L3, Speed, NB CLK, Able to Change Frequency and uCode Patch Level.
Note: Zero is always the "Boot Strap Processor" or main CPU with all others being "Application Processors".
GART Error Reporting
This option should remain disabled for normal operation. The driver developer may enable this option for testing purposes. Options are Enabled or Disabled.
Microcode Update
This setting Enables or Disables microcode updating.
Power Now
This setting is used to Enable or Disable the AMD Power Now feature.
