Appendix B: Software Installation

Adding/Deleting Hotspares

Note: In order to rebuild a RAID (RAID 0 or RAID 1), you need to add a new HDD as a hotspare.

1.Turn on your computer and press Ctrl+A as prompted to access the ARC Utility.

2.From the ARC menu, select Array Configuration Utility (ACU).

3.From the ACU menu, select Add/Delete Hotspares.

4.Use the up and down arrow keys to highlight and select the disk you want to designate as a hotspare, and press Insert, then press Enter.

5.Select Yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Select Drive Menu.

B-11

Page 111
Image 111
SUPER MICRO Computer 6014P-TR user manual Adding/Deleting Hotspares