SUPERSERVER
6.Press Enter.
7.Read the warning message as shown on the screen below.
8.Make sure that you have selected the correct disk drives to initialize. If cor- rect, type Y to continue.
Rebuilding Arrays
Note 1: Rebuilding applies to Fault Tolerant arrays (RAID 1) only.
If an array build process (or initialization) is interrupted or critical with one member missing, you must perform a rebuild to optimized its functionality. For a critical array rebuild operation, the optimal drive is the source drive.
Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare before you can rebuild an array.
To Rebuild an array:
1.From the Main Menu, select Manage Arrays. From the list of arrays, select the array you want to rebuild.
2.Press Ctrl+R to rebuild.
