SUPER MICRO Computer 6014P-TR user manual Power LED/Speaker, Wake-On-Ring

SUPERSERVER 6014P-T/6014P-TR User's Manual

Power LED/Speaker

On the JDI header, pins 1-3 are for

apower LED and pins 4-7 are for the speaker. See the table on the right for speaker pin defi nitions.

Note: The speaker connector pins are for use with an external speaker. If you wish to use the onboard speaker, you should close pins 6-7 with a jumper.

Wake-On-Ring

The Wake-On-Ring header is desig- nated WOR. This function allows your computer to receive and "wake-up" by an incoming call to the modem when in suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature.

ATX PS/2 Keyboard and PS/2 Mouse Ports

The ATX PS/2 keyboard and PS/2 mouse ports are located beside the VGA port. See the table at right for pin defi nitions. (See Figure 5-4 for locations.)

Speaker Connector

Pin Definitions (JD1)

Pin #	Function	Defi nition
4	+	Speaker data (red wire)
5	Key	No connection

6Key

7Speaker data

Wake-On-Ring

Pin Definitions (WOR)

Pin# Defi nition

1Ground (Black)

2 Wake-up

PS/2 Keyboard and

Mouse Port Pin

Definitions

Pin# Defi nition

1Data

2NC

3Ground

4VCC

5Clock

6 NC

5-16