SUPER MICRO Computer 6014P-TR user manual Watch Dog, Memory Speed Select

SUPERSERVER 6014P-T/6014P-TR User's Manual

Watch Dog

JWD1 controls Watch Dog, a system monitor that takes action when a soft- ware application freezes the system. Jumping pins 1-2 will cause WD to reset the system if an application is hung up. Jumping pins 2-3 will gen- erate a non-maskable interrupt signal for the application that is hung up. See the table on the right for jumper settings. Watch Dog can also be enabled via BIOS.

Note: When enabled, the user needs to write his own application software in order to disable the Watch Dog Timer.

Watch Dog

Jumper Settings (JWD1)

Jumper Setting	Defi nition
Pins 1-2	Reset
Pins 2-3	NMI
Open	Disabled

Memory Speed Select

Use XJ4F1 and XJ4F2 to select the speed of the system memory. See the table on the right for jumper defi - nitions. The default setting is closed (DDR333).

Note: if these jumpers are not set cor- rectly, you may experience problems with your video display.

Memory Speed Select

Jumper Settings

(XJ4F1, XJ4F2)

XJ4F1	XJ4F2	Defi nition
Closed	Closed	333 MHz (DDR333)
Open	Open	266 MHz (DDR266)

5-20