SUPER MICRO Computer 6014P-TR user manual UID Button & UID LED, Power Button, Chassis Intrusion

SUPERSERVER 6014P-T/6014P-TR User's Manual

UID Button & UID LED

A Unit Identifi er button/LED is located next to the VGA port on the rear of the chassis and a UID LED and button (separate) are located on the front control panel. The UID LED con- nection is located on pins 3 and 4 of JF1. Refer to the table on the right for pin defi nitions and to page 5-21 for details.

Power Button

The Power Button connection is located on pins 1 and 2 of JF1. Mo- mentarily contacting both pins will power on/off the system. This button can also be confi gured to function as a suspend button (see setting in BIOS). To turn off power in suspend mode, depress the button for at least 4 seconds.

Chassis Intrusion

A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion.

JLAN1/2 (Ethernet Ports)

Two gigabit Ethernet ports are located

beside the VGA port. These ports ac-

cept RJ45 type cables.

UID & UID_LED

Pin Definitions (JF1)

Pin# Defi nition

3Front UID

4 UID_LED

Power Button

Pin Definitions (JF1)

Pin# Defi nition

1PW_ON

2 Ground

Chassis Intrusion

Pin Definitions (JL1)

Pin# Defi nition

1Intrusion Input

2Ground

5-14