SUPER MICRO Computer 6014P-TR Universal Serial Bus USB0/1, Universal Serial Bus Headers

Chapter 5: Advanced Serverboard Setup

Universal Serial Bus (USB0/1)

Universal Serial Bus

Pin Definitions (USB0/1)

Two USB 2.0 ports are located beside the GLAN (Ethernet) ports. USB0 is the bottom port and USB1 is the top port. See the table on the right for pin defi nitions.

USB0

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 N/A

USB1

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 Key

Universal Serial Bus Headers

Front Panel Universal Serial Bus

Pin Definitions (USB2/3)

Two extra USB headers (at FPUSB2/ FPUSB3) can be used for front side USB access. You will need a USB cable to use these connections. Re- fer to the tables on the right for pin defi nitions.

USB2

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 N/A

USB3

Pin # Defi nition

1+5V

2PO-

3PO+

4Ground

5 N/A

Fan Headers

There are ten fan headers (FAN1- FAN10) on the X6DHP-TG. These fans use DC power. See the table on the right for fan pin defi nitions.

Note: Fan speed is controlled by the "Fan Speed Control Mode" setting in BIOS (see page 7-16).

Serial Ports

There are two COM headers (JCOM1 and JCOM2) located between the Marvell SATA ports and the fl oppy connector. See the table on the right for pin defi nitions.

Fan Header

Pin Definitions (Fan1-10)

Pin#	Defi nition		Color
1	Fan Power		Red
2	Tachometer		Yellow
3	Ground		Black
4	Ground		Grey
5	Tachometer		White
6	Fan Power		Orange
	Serial Port Pin Definitions
	(JCOM1/JCOM2)
Pin #	Defi nition	Pin #		Defi nition
1	DCD			DSR
		6
2	RXD			RTS
		7
3	TXD			CTS
		8
4	DTR			RI
		9
5	Ground			NC
		10

Note: Pin 10 is included on the header but not on the port. NC indicates no connection.

5-15