SUPER MICRO Computer 6026TT-GIBQRF, 6026TT-GTRF Preface, About This Manual, Manual Organization

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6026TT-GTRF/ GIBXRF/GIBQRF. Installation and maintenance should be performed by experi- enced technicians only.

The SuperServer 6026TT-GTRF/GIBXRF/GIBQRF is a GPU-ready, 2U Twin (two serverboards/nodes in a 2U chassis) rackmount server based on the SC827HD- R1400B server chassis and four Super X8DTT-HF+/X8DTT-HIBXF+/X8DTT- HIBQF+ serverboards. The "(H)" in the product name indicates that the system is cableless.

The main differences between the various serverboards and the servers they are in is shown in the table below:

Model Variations (Differences between X8DTT-x Models)

	X8DTT-HF+	X8DTT-HIBXF+	X8DTT-HIBQF+
IPMI 2.0 w/ KVM	Yes	Yes	Yes
Over LAN
InfiniBand	No	Yes	Yes
Connection
DDR IB	No	Yes	No
QDR IB	No	No	Yes

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the server system and describes the main features of the Super X8DTT-HF+/X8DTT- HIBXF+/X8DTT-HIBQF+ serverboard and the SC827HD-R1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6026TT- GTRF/HDIBXRF/HDIBQRF into a rack and check out the server configuration prior to powering up the system. If your server was ordered without the processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation.

iii