SUPER MICRO Computer 6026TT-GTRF, 6026TT-GIBQRF, 6026TT-GIBXRF Control Panel, System Fans

SUPERSERVER 6026TT-GTRF/GIBXRF/GIBQRF User's Manual

Figure 6-1. Chassis Front View

Node A Control Panel Node B Control Panel

SATA Drives

Figure 6-2. Chassis Rear View

Dedicated IPMI LAN Port	Dedicated IPMI LAN Port
LAN Ports PCI-Express x16 Card (1)	Power Supply	LAN Ports PCI-Express x16 Card (1)

USB Ports COM Port VGA Port InfiniBand Port* USB Ports COM Port VGA Port InfiniBand Port*

*The InfiniBand ports are included on the 6026TT-GIBXRF and 6026TT-GIBQRF only.

6-2 Control Panel

Each control panel on the front of the chassis must be connected to the JF2 con- nector on its associated serverboard to provide you with system control buttons and status indicators.

These wires have been bundled together in a ribbon cable to simplify the connection. Connect the cable from JF2 on the serverboard to the control panel PCB (printed circuit board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess cabling out of the airflow path. The LEDs inform you of system status for the serverboard it is connected to. See Chapter 3 for details on the LEDs and the control panel buttons.

6-3 System Fans

The system has four hot-swappable 8-cm PWM fans to provide the cooling for both nodes. The fans connect directly to the backplane but receive their power from the serverboard they are connected to logically. Fan speed may be controlled by a setting in BIOS (see Chapter 7).

6-2