Add-on Card User's Guide
Using Manual Configuration: RAID 0
Follow these steps to create a RAID 0 storage configuration using the Manual Configuration mode of the Configuration Wizard.
Figure 6-5 shows the first screen that appears when you select Manual Configura- tion.
Figure 6-5: Manual Configuration - First Manual Configuration Screen
1.In the first Manual Configuration window, select two or more available drives in the left panel. Click the Right Arrow button to move the selected drives to the right panel.
Note: MegaRAID Storage Manager software will not allow you to select the disk drive on which the operating system is installed or any other drives that are already part of a configuration.
2. Click Accept to accept these drives for the new RAID 0 array.
Note: To remove a single drive from a proposed new array, select the drive icon in the right panel and click the Left Arrow button.
3. Click Next.
The next Configuration Wizard window appears, as shown in Figure
