SUPER MICRO Computer C7Z87-OCE USB Wake-Up Jpusb 1/2, Over-Clocking Buttons OC1,OC2, OC3

Chapter 2: Installation

USB Wake-Up (JPUSB 1/2)

Use jumper JPUSB1 to activate the "wake- up" function of the USB ports by pressing a key on a USB keyboard or clicking the USB mouse connected. This jumper is used together with a USB Wake-Up feature in the BIOS. Enable this jumper and the USB sup- port in the BIOS to wake up your system via USB devices.

Note: Use JPUSB1 for the USB ports on the back panel, and JPUSB2 for the front panel USB headers.

Over-Clocking Buttons (OC1,OC2, OC3)

Press these buttons to activate the over- clocking feature of the motherboard. These buttons will allow the CPU to run above its rated speed. This is an advanced feature and should only be used by experienced users. Also, refer to the CMOS Reset/Clear features on page 2-20 for related information.

USB Wake-Up

Jumper Settings

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled (Default)

Over-Clocking Buttons

Switch Settings

Switch Setting Definition

OC1 On	15% Over-Clock
OC2 On	20-25% Over-Clock
OC3 On	User Defined (BIOS)

A

B

2-35