a USB CD/DVD ROM/RW device can be used for this purpose. However, a USB Hard Disk drive cannot be used for BIOS recovery at this time.
To perform UEFI BIOS recovery using a
1.Using a different machine, copy the "Super.ROM" binary image file into the disc Root "\" Directory of a USB device or a writeable CD/DVD.
Note: If you cannot locate the "Super.ROM" file in your driver disk, visit our website at www.supermicro.com to download the BIOS image into a USB flash device and rename it to "Super.ROM" for BIOS recovery use.
2.Insert the USB device that contains the new BIOS image ("Super.Rom") into your USB drive and power on the system
3.While powering on the system, keep pressing <Ctrl> and <Home> simultane- ously on your PS2 or USB keyboard until your hear two short beeps. This may take from a few seconds to one minute.
4.After locating the new BIOS binary image, the system will enter the BIOS Recovery page as shown below.
| Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. | ||||||
Main | Advanced | Event Logs | IPMI | Boot | Security | Exit | Recovery |
WARNING! BIOS Recovery Mode has been detected
Flash Update Parameters |
|
Reset NVRAM | [Enabled] |
Proceed with Flash Update |
|
Set this to start ash update
: Select Screen
: Select Item Enter: Select
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
Version 2.12.1211. Copyright (C) 2011 American Megatrends, Inc.
Note: At this point, you may decide if you want to start with BIOS Recov- ery. If you decide to proceed with BIOS Recovery, follow the procedures below.