![](/images/new-backgrounds/1202356/202356163x1.webp)
![](/images/new-backgrounds/1202356/202356163xi2.webp)
![](/images/new-backgrounds/1202356/202356163xi3.webp)
![](/images/new-backgrounds/1202356/202356163xi4.webp)
![](/images/new-backgrounds/1202356/202356163xi5.webp)
![](/images/new-backgrounds/1202356/202356163xi6.webp)
X9SPU-F Motherboard User’s Manual
Console Redirection Settings (for EMS)
This feature allows the user to specify how the host computer will exchange data with the client computer, which is the remote computer used by the user.
Out-of-Band-Mgmt Port
Use this feature to select the port for
Terminal Type
This feature allows the user to select the target terminal emulation type for Con- sole Redirection. Select VT100 to use the ASCII character set. Select VT100+ to add color and function key support. Select ANSI to use the extended ASCII character set. Select
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec- tion. Make sure that the same speed is used in the host computer and the client computer. A lower transmission speed may be required for long and busy lines. The options are 9600, 19200, 57600, and 115200 (bits per second).
Flow Control
This feature allows the user to set the flow control for Console Redirection to prevent data loss caused by buffer overflow. Send a "Stop" signal to stop send- ing data when the receiving buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The options are None, Hardware RTS/ CTS, and Software Xon/Xoff.
Hardware Health Configuration
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU